Resin Concrete Drainage /Resin Concrete Kerb Drain
1) Body Material following requirements as blow:
① Compressive Strength≥90N/mm²
② Bending Strength≥22N/mm²
③ Density 2.1-2.3kg/d m³;
④ Surface Luster<25μm;
⑤ Water Penetration Depth 0mm(0.5MPa keep in 72 hours)
⑥ Elasticity Modulus>25KN/mm²
⑦ Body meets the requirement of no corrosion phenomenon in the salt spray test.
2) Finished product following requirements as blow:
① Length of each drainage ditch body is 1m, which is designed for zero slope, its inner wall is smooth without pores; dropwell also be made of resin concrete with two-layer structure.
② Each drainage ditch body has at least 5 reinforcing ribs to ensure the design load requirements.
3) Drainage Cover following requirements as blow:
① Cover material is nodular cast iron, complies with the QT500-7 standard.
② Cover can prevent leaves from falling in and high heels from getting stuck，gap width ≤6mm，the pattern is wheel-shaped, it has a good sense of art and aesthetic appeal. Each drainage ditch body and cover connect with at least 4 high-strength external hexagonal flange screws to prevent people from getting stuck due to trampling and vehicles from running over and shaking.
4) Executive Standard: EN1433.
Address: Building B2, No. 188, Hailuo Road, Quanjiao County, Chuzhou City, Anhui Province，China
yajing
Messages
